Toshiba e-STUDIO4500c Service Manual page 230

August, 2006
[C]
13. Place the development unit [A] on a clean sheet of A3/DLT paper [B].
14. With a fingernail release the tabs [C] on the left.
15. Hold the development unit steady with one hand [D] as you remove the old
cartridge [E] from the development unit.
Important:
The development unit is top heavy, and it tips easily. Be sure to steady it with
one hand as you remove the old cartridge.
Discard the old cartridge. Please obey the local laws and regulations
regarding the disposal of such items.
The screws removed from the cartridge do not have washers. (Do not
confuse these screws for the plate screws that were removed in the previous
step.)
[D]
[B]
3-43
PCU (PHOTOCONDUCTOR UNITS)
[E]
B132I105.WMF
[A]