Toshiba e-STUDIO4500c Service Manual page 505

April, 2007
Using the Screen:
To select the item for upgrade, press the selection on the touch panel, or
press the corresponding key on the 10-key pad (1 to 5) of the operation
panel. The number in parentheses tells you which key to press. When you
make a selection, the [Verify(./)] and [Update(#)] buttons come on the
screen.
If you press [Exit] (or the [0] key), you go back to the usual operation screen.
Press the [Start] key on the operation panel to select and download all the
options shown on the screen.
Press the [Clear] key on the operation panel if you want to cancel your
selections and make new ones.
While the Update Is in Progress...
Remain with the machine. Do not leave it unattended.
The [Start] key flashes RED during firmware update, and then lights GREEN
when the update is finished.
Never switch the machine OFF while the [Start] key is flashing RED. If the
machine is switched OFF or accidentally unplugged before the update is
finished, do not remove the SD card. Just switch the machine on again. The
firmware update should restart automatically. If the firmware update does
not recover, order another System SD card (P/N B1325730).
Never close the front door during firmware update.
PCcard -> ROM Page01
Engine (1)
System (2)
NA
EU
Exit (0)
5-13
FIRMWARE UPDATE
B132S901.WMF