Toshiba e-STUDIO4500c Service Manual page 606

SERVICE PROGRAM TABLES
5803 Input Chk
5804 Output Chk
5810 Cancel Fusing SC
When the machine issues one of the "Level A" SC codes shown below, this
indicates a serious problem in the fusing unit. The machine is disabled and the
operator cannot reset the SC. The machine requires servicing immediately. Use this
SP code to release the machine for servicing.
SC542 – SC545 Heating roller thermistor 1
SC547 – Zero Cross
SC548 – SC550 Heating roller thermistor 2
SC551 – Pressure roller thermistor
SC553 – SC555 Pressure roller thermistor
SC662 – SC565 Hot roller thermistor
5811 Machine No. Setting
5812 Service Tel. No. Setting
001 Service
002 Facsimile
003 Supply
004 Operation
Input Check (Mainframe) ( 5.6.1)
Output Check ( 5.6.2)
Cancel Fusing SC Code
Displays the machine serial number.
Inputs the telephone number of the CE (displayed when a
service call condition occurs.)
Use this to input the fax number of the CE printed on the
Counter Report (UP mode). Not Used
Displayed on the initial SP screen.
Allows the service center contact telephone number to be
displayed on the initial screen.
5-114
August, 2006