Merging Applications On One Sd Card; Overview - Toshiba e-STUDIO4500c Service Manual

August 2006

1.15.5 MERGING APPLICATIONS ON ONE SD CARD

Overview

Only one SD card slot is available for SD
card applications.
The machine has three SD card slots. Slot
1 is used for the system card. Slot 2 is
used for application programs, and Slot 3
is used for servicing only.
If the customer wants to use more than
one application SD card, the applications
must be put together on the same SD card.
Important
The data necessary for authentication is transferred with the application program
to the target SD card.
Do not use an SD card if it was used with a computer before this time. Correct
operation is not guaranteed if this type of SD card is used.
The SD card is the only evidence that the customer is licensed to use the
application program. The service engineer may occasionally need to check the
SD card and its data to solve problems. SD cards must be stored in the cover on
the door of the copier. ( Pg.1-116)
A licensing agreement prohibits copying of the PostScript SD card. However, you
can copy an application from another SD card to the PS SD card.
If an SD card was used to combine applications on that card, that SD card
cannot be used for a different function.
N
EVER REMOVE THE
S SD C
YSTEM ARD FROM
1-119
MFP CONTROLLER OPTIONS
I/F Card Slot
A
File Format Converter
B Tandem
C External CTL
D Option
E Ethernet & USB (Ver. 2.0)
SD Card Slot
3 Service
2 Option
1 System
S 1.
LOT
NEXT
COPIER
KEY
CARD
A
L-ADP
C D
B
E
A File Format Converter
B Tandem
C External CTL
D Option
E Ethernet & USB (Ver. 2.0)
SD Card Slot
3 Service
2 Option
1 System
B132I907.WMF