Cleaning; Fusing Unit; Paper Feed; Used Toner (Waste Toner) - Toshiba e-STUDIO4500c Service Manual

GENERAL CAUTIONS

3.1.7 CLEANING

1. When servicing cleaning components, avoid nicking the edges of the cleaning
blades.
2. Never handle a cleaning blade with bare hands.
3. Before disassembling a cleaning section, place a sheet of paper under it to
catch any toner falling.

3.1.8 FUSING UNIT

1. Never handle fusing lamps and rollers with bare hands.
2. Make sure that the fusing lamps are positioned correctly and do not touch the
inner surface of the rollers.

3.1.9 PAPER FEED

1. Do not touch the surfaces of the pick-up, feed, and separation rollers.
2. To avoid paper misfeeds, the side fences and end fence of the paper trays
must be positioned correctly to align with the actual paper size.

3.1.10 USED TONER (WASTE TONER)

1. We recommend checking the amount of used toner at every EM (Emergency
Maintenance).
2. Always dispose of used toner in accordance with local regulations.
3. Never throw toner into an open flame.
3-4
August, 2006