Toshiba e-STUDIO4500c Service Manual page 499

April, 2007
No. What It Initializes
1 All Clear
2 Engine
3 SCS
4 IMH Memory
5 MCS
6 Copier application
7 Fax application
8 Printer application
9 Scanner application
10 Web Service/
Network application
11 NCS
14 Clear DCS Setting
15 Clear UCS Setting
16 MIRS Setting
17 CCS
4. Press "Execute", then follow the prompts on the display to complete the
procedure.
5. Make sure that you perform the following settings:
Do the printer and scanner registration and magnification adjustments (
3-19-1 to 3-19-3)
Do the touch screen calibration (
Refer to the SMC data lists and re-enter any values which had been
changed from their factory settings.
Execute SP3820-001 – Manual Process Control Self Check
6. Check the copy quality and the paper path, and do any necessary adjustments.
Comments
Initializes items 2 to 15 below.
Initializes all registration settings for the engine and copy
process settings.
Initializes default system settings, SCS (System Control
Service) settings, operation display coordinates, and ROM
update information.
Initializes the image file system.
(IMH: Image Memory Handler)
Initializes the automatic delete time setting for stored
documents.
(MCS: Memory Control Service)
Initializes all copier application settings.
Not used.
Initializes the printer defaults, programs registered, the printer
SP bit switches, and the printer CSS counter. (Not used)
Initializes the defaults for the scanner and all the scanner SP
modes.
Deletes the Netfile (NFA) management files and thumbnails,
and initializes the Job login ID.
Netfiles: Jobs to be printed from the document server using a
PC and the DeskTopBinder software
Initializes the system defaults and interface settings (IP
addresses also), the SmartNetMonitor for Admin settings,
WebStatusMonitor settings, and the TELNET settings.
(NCS: Network Control Service)
Initializes the DCS (Delivery Control Service) settings.
Initializes the UCS (User Information Control Service) settings.
Initializes the MIRS (Machine Information Report Service)
settings.
Initializes the CCS (Certification and Charge-control Service)
settings.
3-20).
5-7
RESETS