Appendix: - Toshiba e-STUDIO4500c Service Manual

April, 2007

APPENDIX:

Default settings of SP modes related to previous Temporary Solutions A, B and B+
SP
Description
Number
1105-003 Htg Roll Sn1: Ctr
Wait Temp: Norm
1105-006 Htg Roll Sn1: Ctr
1-S: Norm: 1 Col
1105-007 Htg Roll Sn1:Ctr
1-S:Norm:FC
1105-008 Htg Roll Sn1:Ctr
1-S: Trace:1C
1105-009 Htg Roll Sn1: Ctr
1-S: Trace: FC
1105-014 Htg: Roll Sn1: Ctr
2-S: Norm: 1C
1105-015 Htg: Roll Sn1: Ctr
2-S: Norm: FC
1105-016 Htg: Roll Sn1: Ctr
2-S: Trace: 1C
1105-017 Htg: Roll Sn1:Ctr
2-S: Trace: FC
1105-029 PressRoll Sensor
Wait Temp: Norm
1107-007 Mode Shift
Press Temp: Norm
1107-008 Mode Shift
Press Time: Norm
1107-015 To Cooling Mode
Trace Cool End
1108-008 Htg Roll Lamp2
Norm: FC
1108-009 Htg Roll Lamp2
Scan: Norm: FC
1108-017 Htg Roll Lamp2
At Reload
9406-001 Fan Op Temp
Default
NOTE
Settings
177 deg Heating Roller Temperature in Standby
mode.
175 deg Heating Roller Temperature for normal
paper simplex 1C.
175 deg Heating Roller Temperature for normal
paper simplex FC.
160 deg Heating Roller Temperature for thin paper
simplex 1C
160 deg Heating Roller Temperature for thin paper
simplex FC
175 deg Heating Roller Temperature for normal
paper duplex 1C
175 deg Heating Roller Temperature for normal
paper duplex FC
160 deg Heating Roller Temperature for thin paper
duplex 1C.
160 deg Heating Roller Temperature for thin paper
duplex FC.
152 deg Pressure Roller Temperature for Stand-by
mode.
5 deg Additional Temperature for heating roller at
the start of print job.
10 sec Additional Temperature applying time for
heating roller at the start of print job.
5 Copy/Print job starts when the heating
roller temperature reaches the setting
temperature plus this value.
83 Heating Roller Lamp2 duty for FC printing
66 Heating Roller Lamp2 duty for FC scanning
and printing.
27 Heating Roller Lamp2 duty during machine
warming up.
0 Cooling fan full rotation
0: default (32C)
1: 30C
2: 28C
4-99
ADDITIONAL INFORMATIONS