Toshiba e-STUDIO4500c Service Manual page 49

COPIER E-STUDIO4500C/5500C
[B]
1. Open the front door and, and remove the transfer belt release lever [A] (1 tape).
We will install this in the correct location later.
Important
D [B], [C],
O NOT TOUCH
REMOVE THE FACE PLATE
T
O PREVENT DAMAGE TO THE
UNIT UNTIL AFTER YOU HAVE REMOVED THE ROD WITH THE RED TAG AND WIRE
DRAWER MUST REMAIN INSIDE THE MACHINE UNTIL AFTER THE DEVELOPER IS INSTALLED IN
THE DEVELOPER CARTRIDGES OF THE
T
HE ROD IS REMOVED AFTER THE FACE PLATE IS REMOVED TO INSTALL THE DEVELOPER
. ( P
CARTRIDGES
[C]
[D]
[D]
OR AT THIS TIME
.
ITB,
NEVER TURN DOWN LEVER
PCU
.1-12)
G
[A]
. T
HESE ITEMS ARE REMOVED AFTER YOU
[D]
.
S
1-10
August, 2006
B132I005.WMF
TO PULL OUT THE DRAWER
[B]. T
HE