Toshiba e-STUDIO4500c Service Manual page 520

SERVICE PROGRAM TABLES
1108 Htg Roll Lamp 1
Controls the level of the power (percentage) supplied to the heating rollers (Watts)
when the machine is in the specified mode.
At Reload
Wait Time
Norm:1C
Norm:FC
Scan:Norm:1C
Scan:Norm:FC
At ProCon Reload
Heating Roller: Fusing Lamp 1
001 At Reload
002 Wait Time
003 Norm:1C
004 Norm:FC
Heating Roller: Fusing Lamp 2
005 Wait Time
006 Norm:1C
007 Scan:Norm:1C
008 Norm:FC
009 Scan:Norm:FC
Pressure Roller Fusing Lamp
010 At Reload
011 At ProCon Reload
012 Wait Time
013 Norm:1C
014 Norm:FC
Hot Roller Fusing Lamp
015 At Reload
016 Wait Time
Heating Roller: Fusing Lamp 2
017 At Reload
Heating Roller: Fusing Lamps
During warmup after the machine is switched or returns from
and energy save mode.
While the machine is in the standby mode and ready for
operation.
Normal operation for black-and-white copying and printing.
Normal operation for full color copying and printing
Black-and-white scanning.
Full color scanning.
Reload temperature after completing the process control
cycle.
[ 0~100 / 100 /0.1%]
[ 0~1000 /0.1%]
[ 0~1000 / 1000 /0.1%]
[ 0~100 /0.1%]
[ 0~1000 /0.1%]
[ 0~100 / 100 /0.1%]
[ 0~100 /0.1%]
[ 0~100 / 100 /0.1%]
[ 0~100 / 100 /0.1%]
[ 0~100 / 100 /0.1%]
5-28
April, 2007