Attaching The Interposer Tray (B700/B701/B706) - Toshiba e-STUDIO4500c Service Manual

COVER INTERPOSER TRAY (B704)

Attaching the Interposer Tray (B700/B701/B706)

[B]
1. Pick up the cover interposer tray, align the keyholes [A] with the shoulder
screws [B], then slide the cover interposer down onto the screws.
2. Secure the cover interposer with the screw [C] (
3. If you are installing the cover interposer tray on the B700/B701, skip the next
section and go directly to "Docking Finisher and Interposer" on page 1-11307.
-or-
If you will install the cover interposer tray on the B706, go to the next section,
install the corner plates on the B706, then go to "Docking Finisher and
Interposer" on page 1-11307.
[A]
1-110
August 2006
B704I105.WMF
x 1, M3 x 6).
[C]