Group 6000 - Toshiba e-STUDIO4500c Service Manual

SERVICE PROGRAM TABLES

Group 6000

6006 ADF Reg Adj
001 ADF Main Reg Adj
003 ADF Sub Reg Adj
005 ADF Buck Adj:Front
006 ADF Buck Adj:Back
007 ADF TEdge EMargin
6007 ADF Input Chk
Displays signals received from sensors and switches in the ADF. ( 5.7.1)
6008 ADF Output Chk
Turns on the ADF electrical components individually for testing. ( 5.7.2)
6009 ADF Free Run
This SP does an ADF free run in duplex original mode.
001 Simplex
002 Duplex
6016 ADF OrgSizePrior
Allows selection of alternate settings for automatic original size detection. ( 6.4.3)
6017 ADF Mag Adj
001 ADF Sub Mag Adj
ADF Registration Adjustment
Adjusts the side-to-side registration for the front/back in ADF
mode.
[–3~+3/0.1 mm]
Adjusts the vertical registration for the front/back in ADF
mode.
[–30 ~+30/0.17 mm]
-30 = -5.1 mm
+30 = +5.1 mm
Adjusts the roller timing at the skew correction
sensor/entrance roller. A higher setting causes more
buckling.
[–12.0~+12/0.25 mm]
-12 = -3.0 mm
+12 = +3.0 mm
Adjusts the roller timing at the interval sensor/scanning roller.
A higher setting causes more buckling.
[–8.0~+8/0.25 mm]
[–8.0~+8/0.25 mm]
-8 = -2 mm
+8 = +2 mm
These settings adjust the erase margin for the trailing edges
for the front/back.
[–20~+20/0.5 mm]
-20 = -10 mm
+20 = +10 mm
ADF Input Check
ADF Output Check
ADF Free Run
ADF Original Size Detection Priority
ADF Magnification Adjustment
This changes the magnification by adjusting the speed of
scanning.
[–50(–5%)~+50(+5%)/0.1%]
5-132
August, 2006