Toshiba e-STUDIO4500c Service Manual page 208

August, 2006
To re-install the drawer unit
1. Remove the right upper cover and the left upper cover. ( 3.2.3, 3.2.5,)
2. Open the front door.
3. Pull out the left rail and right rail.
4. Set the unit on the rails.
CAUTION
The drawer unit is very heavy (30 kg/66lb.). Make sure that hooks are
engaged with the holes on the rails.
5. Slowly push the unit into the machine until it stops.
6. Rotate the lever [A] clockwise to the vertical position.
7. Fasten the screws to the left rail [B] (
8. Fasten the screws to the right rail [C] (
Important! Make sure these screws are fastened and tight. This ensures that
the unit is positioned correctly.
COMMON REMOVAL PROCEDURES
[B]
x2).
x2).
3-21
[C]
[A]
B132R617.WMF