Power Requirements - Toshiba e-STUDIO4500c Service Manual

August, 2006

1.1.5 POWER REQUIREMENTS

WARNING!
1. Make sure that the wall outlet is near the main machine and that you can
get access to it easily. Make sure the plug is tightly connected to the
outlet.
2. Do not connect more than one electrical device to the same power
outlet.
3. Be sure to ground the machine.
4. Do not put objects on the power cord.
Input voltage level
Permissible voltage fluctuation
CAUTION
Do not turn off the main power switch when the power LED is lit or
flashing. To prevent damage to the hard disk or memory, push the
operation switch to turn the power off, then do nothing until the power LED
goes off, and then turn the main power switch off.
There are two power switches on the machine:
Main Power Switch.
This is located on the front left corner of the machine and has a plastic cover.
This switch must always be on unless a technician does work on the machine.
Operation switch.
This is located on the right side of the operation panel. This is the switch that the
customer uses to turn the machine on and off.
North America 120 V, 60 Hz: More than 20 A
10%
1-5
INSTALLATION REQUIREMENTS