August, 2006
3.10.5 DUPLEX JOGGER BELT
Remove:
Remove the inverter unit ( 3.10.3)
Cross stay ( 3.10.3)
Reverse trigger roller assembly ( 3.10.3)
Jogger fences ( 3.10.3)
Left transport cover ( 3.10.3)
Duplex jogger motor ( 3.10.4).
1. If you are replacing the belt, set both jogger fence brackets at the center of the
belt and tighten the screw [A].
2. If you are adjusting the belt, loosen the screw and slide the plastic piece [B] on
the belt to the left or right to adjust the position of the front fence, then tighten
the screw.
[A]
3-111
DUPLEX UNIT
[B]
B140R819.WMF