Toshiba e-STUDIO4500c Service Manual page 565

April, 2007
2841 Sp2:FC:LL
2842 Sp2:FC:ML
2843 Sp2:FC:MM
These SPs set the standard values of the electrical charges that are applied to 1)
create bias for image transfer from drum to ITB, 2) create bias for image transfer
from ITB to paper (PTR), and 3) neutralize the charges on the both sides of the
paper to separate the paper from the ITB (SepDC, SepAC). These settings are
used when printing on Special Paper 2 in the full-color mode and are applied only to
the image area.
017 Side1:PTR
018 Side1:SepDC
019 Side1:SepAC
027 Side2:PTR
028 Side2:SepDC
029 Side2:SepAC
2844 Sp2:FC:MH
2845 Sp2:FC:HH
017 Side1:PTR
018 Side1:SepDC
019 Side1:SepAC
027 Side2:PTR
028 Side2:SepDC
029 Side2:SepAC
2851 Sp3 K Bias
These SPs set the standard values of the electrical charges that are applied to 1)
create bias for image transfer from drum to ITB, 2) create bias for image transfer
from ITB to paper (PTR), and 3) neutralize the charges on the both sides of the
paper to separate the paper from the ITB (SepDC, SepAC). These settings are
used when printing on Special Paper 3 in the black-and-white mode and are applied
only to the image area.
001 ITB
007 Side1:PTR
008 Side1:SepDC
009 Side1:SepAC
012 Side2:PTR
013 Side2:SepDC
014 Side2:SepAC
Special Paper 2: FC Low
Special Paper 2: FC Medium Low
Special Paper 2: FC Medium
2841
[10~250/5%]
Special Paper 2: FC Medium High
Special Paper 2: FC High
2844
[10~250/5%]
[10~250/5%]
[10~250/5%]
Set Bias for Special Paper 3: K
[0~500/0.1 a]
[-100~0/1 a]
[0~100/0.1 a]
[80~120/0.1 kV]
[-100~0/1 a]
[0~100/0.1 a]
[80~120/0.1 kV]
5-73
SERVICE PROGRAM TABLES
2842
[10~250/5%]
2845
[10~250/5%]
[10~250/5%]
[10~250/5%]
2843
[10~250/5%]