Attaching The Corner Plates For The B706 - Toshiba e-STUDIO4500c Service Manual

August 2006

Attaching the Corner Plates for the B706

Important:
The corner plates are installed on the B706 only.
Right Rear Corner Plate (B706 only)
NG
[A]
1. Temporarily attach the screws [A] (with about two turns) to the right end of the
finisher extension table [B] (
NOTE: The holes are not visible because they are covered with tape. Just
punch the screws through the holes.
2. Align the cutouts [C] of the right rear corner plate [D] with the screws and attach
the plate.
3. With a long screwdriver inserted through the cutouts in the right rear corner
plate [D], tighten the screws to fasten the right rear corner plate to the table
extension [B].
OK
[B]
x 2, tapping M4 x 8)
1-111
COVER INTERPOSER TRAY (B704)
B704I112.WMF
[C]
[D]