August, 2006
[A]
[B]
17. Check the following to points to be sure that the developer cartridge is set
properly.
Tabs [A] and [B] should be locked.
The developer cartridge edge [C] should be flat and not bulging or floating
away from the side of the development unit
Pull gently on the developer cartridge at [D] to make sure that it does not part
from the development unit.
18. Fasten the cartridge [E] (
I
: D
MPORTANT
O NOT REMOVE THE FILM SEAL
.
TIME
[D]
[C]
B132I106B.WMF
[E]
x2).
[F]
ON THE DEVELOPER CARTRIDGE AT THIS
1-19
COPIER E-STUDIO4500C/5500C
[F]
B132I106C.WMF