Adjustment Procedure - Toshiba e-STUDIO4500c Service Manual

August, 2006

Adjustment Procedure

1. Enter SP mode and open SP2109.
2. Print Pattern 10.
NOTE: Print several printing patterns and average the measured values of the
leading edge and side-to-side registration values.
3. Do the leading edge registration adjustment.
Check the leading edge registration and adjust it with SP1001.
Select the adjustment conditions (paper type and process line speed).
Input the value and press the [#] key.
Check the leading edge adjustment by printing Pattern 10 with SP2109.
4. Do the side to side registration adjustment.
Check the side-to-side registration and adjust it with SP1002.
Select the adjustment conditions for the paper feed station.
Input the value and press the [#] key.
Check the side-to-side adjustment by printing Pattern 10 with SP2109.
3-181
IMAGE ADJUSTMENTS