Toshiba e-STUDIO4500c Service Manual page 540

SERVICE PROGRAM TABLES
2313 Margin FC Bias
This SP sets the image transfer bias for each in areas of the image where nothing
is printed in the full-color mode.
2314 Set ProCon Bias
This SP sets the image transfer bias for each color during the process control self-
check.
2315 Set MUSIC Bias
This SP sets the image transfer bias for each color during MUSIC.
Note:
Full Speed: 52 to 128 g/m² (normal paper)
Half Speed: 128 to 256 g/m² (thick paper)
011 Full Spd:ITB:K
012 Full Spd:ITB:M
013 Full Spd:ITB:C
014 Full Spd:ITB:Y
016 Full Spd:PTR
017 Full Spd:SepDC
018 Full Spd:SepAC
020 Half Spd:ITB:K
021 Half Spd:ITB:M
022 Half Spd:ITB:C
023 Half Spd:ITB:Y
025 Half Spd:PTR
026 Half Spd:SepDC
027 Half Spd:SepAC
2316 Pwr On Jam Bias
Sets the image development bias to be applied for each color after recovery from a
paper jam at power ON.
002 ITB:K
003 ITB:M
004 ITB:C
005 ITB:Y
007 PTR
2381 Ptype K:LL
This SP sets image transfer bias for LL (lowest) speed during black-and-white
copying in areas where black is used to develop the image.
006 Full Spd:ITB
011 Half Spd:ITB
Margin FC Bias: Setting for K
Process Control: Bias Setting for K
MUSIC Bias Setting
2313
[0~500/0.1 A]
[0~500/0.1 A]
[0~500/0.1 A]
[0~500/0.1 A]
[-6~0/1 A]
[0~100/0.1 A]
[80~120/0.1 A]
[0~500/0.1 A]
[0~500/0.1 A]
[0~500/0.1 A]
[0~500/0.1 A]
[-100~0/1 A]
[0~100/0.1 A]
[80~20/0.1kV]
Power On/Jam Recovery: Bias Setting
[0 to 50/0.1 A]
Paper Type K: LL
[10~250/1%]
[10~250/1%]
2314
[0~500/0.1 A]
[0~500/0.1 A]
[0~500/0.1 A]
[0~500/0.1 A]
[-6~0/1 A]
[0~100/0.1 A]
[70~100/0.1 A]
[0~500/0.1 A]
[0~500/0.1 A]
[0~500/0.1 A]
[0~500/0.1 A]
[-100~0/1 A]
[0~100/0.1 A]
[80~20/0.1kV]
5-48
April, 2007
2315
[0~500/0.1 A]
[0~500/0.1 A]
[0~500/0.1 A]
[0~500/0.1 A]
[-6~0/1 A]
[0~100/0.1 A]
[80~120/0.1 A]
[0~500/0.1 A]
[0~500/0.1 A]
[0~500/0.1 A]
[0~500/0.1 A]
[-100~0/1 A]
[0~100/0.1 A]
[80~20/0.1kV]