Toshiba e-STUDIO4500c Service Manual page 621

August, 2006
5871 HDD Function Disable
Disables the HDD functions by suppressing all functions that write data to the
HDD. After this SP is executed, the machine must be switched off and on to
enable the setting.
[0~1/1]
0: OFF
1: ON
Note: This SP is intended for use during installation of the Data Overwrite
Security Unit Type C (B735). For more, see section "1. Installation".
5873 SD Card Apli.
Allows you to move applications from one SD card another. For more, see
"1.15.5 Mergining Applications on One SD Card".
001 Move Exec
002 Undo Exec
5875 SC Auto Reboot
Determines whether the machine reboots automatically when an SC error occurs.
[0~1/1]
0: The machine reboots automatically when the machine issues an SC error and
logs the SC error code. If the same SC occurs again, the machine does not
reboot.
1: The machine does not reboot when an SC error occurs.
The reboot does not occur for Type A SC codes.
5878 Option Setup
Press [Execute] to initialize the Data Overwrite Security option for the copier.
For more, see "1.15 MFP Controller Options" in Section "1. Installation".
5880 ACS High Performance Mode
This SP enables and disables ACS. In the ACS mode the machine raises/lowers
the ITB to print color/black-and-white. If a job contains both full-color and black-
and-white pages, the ITB raises for the color pages and lowers for the black-and-
white pages. ACS reduces wear on the color drums but reduces printing speed
slightly.
0: ACS enabled. The ITB raises/lowers for full-color/black-and-white printing.
1: ACS disabled. The ITB remains in contact with all four drums regardless of
whether the job is for full-color or black-and-white. This setting allows the
machine to print faster than the ACS mode because no time is required for the
raising/lowering of the ITB.
Executes the move from one SD card to another.
This is an undo function. It cancels the previous execution.
Data Overwrite Security Unit (B735) Setup
5-129
SERVICE PROGRAM TABLES