Toshiba e-STUDIO4500c Service Manual page 465

April, 2007
5. Clean the drum charge roller.
1) Wipe the drum charge roller with a clean dry cloth.
2) Then, wipe the drum charge roller with a wet cloth.
NOTE: Use "water" to make the cloth wet. Do not use alcohol or any solvent.
3) Then, wipe the drum charge roller with a clean dry cloth again. Wait for the
drum charge roller to dry.
6. Clean the charge roller cleaning roller [D] with vacuum cleaner if it is also dirty.
NOTE: Make sure you do not to touch the charge roller cleaning roller with the
vacuum cleaner nozzle [E].
[E]
NG
NG
[D] If the vacuum nozzle touches the
cleaning roller, this kind of damage
will occur.
4-87
ADDITIONAL INFORMATIONS
Water drop such as this
should not remain.