Modular L3 Ethernet Switch User's Guide
Figure 6- 57. GVRP Port Timers Control window
The GVRP Timers Control window displays the following parameters:
♦ If Num – Indicates the port number for which GVRP is enabled.
♦ Join Time – Indicates the time in milliseconds that PDUs are transmitted.
♦ Leave Time – Indicates the time lapse in milliseconds that the device waits before leaving its
GVRP state. The Leave Time is activated by a Leave All Time message sent/received, and
cancelled by the Join message received.
♦ Leave All Time – Used to confirm the port within the VLAN. The time in milliseconds between
messages sent.
To Edit a Timer Control:
1.
Display the GVRP Port Timers Control window.
2.
Select an entry in the GVRP Port Timers Control table.
3.
Click
. The GVRP Port Timers Edit window opens:
Figure 6- 58. GVRP Port Timers Edit window
1.
Edit the fields. The fields are the same as the GVRP Timers Control window as described above.
93