D-Link DES-6300 User Manual page 157

Modular L3 Ethernet Switch User's Guide
♦ IPM Routing
IPM Operating Parameters
The IPM Operating Parameters window enables IPM Routing on a device.
To display the IPM Operating Parameters window:
♦ Select Router > IPM > Operating Parameters. The IPM Operating parameters
window opens:
Figure 6- 129. IPM Operating parameters window
The IPM Operating parameters window displays the following field:
♦ IPM routing enable – Enables IPM routing on a device. Disabled is the default.
To enable IPM routing on a device:
1. Display the IPM Operating Parameters window.
2. Set the IPM Routing status to Enabled.
3. Click to update the device. When the Status field displays "Finished!", IPM Routing is
enabled on the device.
IGMP
The Internet Group Management Protocol (IGMP) establishes host memberships within a multicast
group. IGMP allows devices to notify routers that they can receive multicast packets addressed to
specific multicast groups.
Note: Ports belonging to a VLAN without IGMP membership are not forwarded multicast traffic.
The IGMP menu has the following menus options:
♦ Parameters
♦ Interface Table
♦ Cache Table
IGMP Operating Parameters
The IGMP Operating Parameters window displays information regarding IGMP MIB software version.
To display the IGMP Operating Parameters window:
♦ Select Router > IPM > IGMP > Parameters. The IGMP Parameters window opens:
157