D-Link DES-6300 User Manual page 140

Modular L3 Ethernet Switch User's Guide
Figure 6- 109. OSPF Area Table Insert window
1. Complete the fields.
2. Click .
3. Close the OSPF Area Table Insert window. The OSPF Area Table opens.
4. Click . When the Status field displays "Finished!", the fields are confirmed as modified.
To edit an OSPF Area Table entry:
1. Display the OSPF Area Table.
2. Select an in the table.
3. Click . The OSPF Area Table Edit window opens. The OSPF Area Table Edit is identical to
the OSPF Area Table Insert window.
4. Edit the required fields. The Area ID field cannot be edited.
5. Click .
6. Close the OSPF Area Table Edit window. The OSPF Area Table opens.
7. Click . When the Status field displays "Finished!", the fields are confirmed as modified.
To delete an OSPF Table entry:
1. Display the OSPF Area Table Edit window.
2. Select an entry in the table.
3. Click . The area is deleted.
4. Click . When the Status field displays "Finished!", the fields are confirmed as modified.
Link State Database
This is a read-only command. The database cannot be modified.
To display the Link State Database:
♦ Select Router > IP > OSPF II > Link State Database. The Link State Database window
opens:
140