D-Link DES-6300 User Manual page 162

Modular L3 Ethernet Switch User's Guide
Figure 6- 135. IGMP Filter Enable window
The IGMP Filter Enable window displays the following field:
♦ IGMP Filter – Enables IGMP filtering on a device. Disabled is the default.
To enable IGMP filtering on a device:
1. Display the IGMP Filter Enable window.
2. Set the IGMP filtering status to Enabled.
3. Click to update the device. When the Status field displays "Finished!", IGMP filtering is
enabled on the device.
IGMP Filter Table
The IGMP Filter Table contains IGMP filter information for which IGMP is currently enabled.
To display the IGMP Filter Table:
Figure 6- 136. IGMP Filter Table window
The IGMP Filter Table displays the following fields:
♦ Select Router > IPM > Filter > IGMP Filter Table. The IGMP Filter Table
opens:
162