Modular L3 Ethernet Switch User's Guide
Figure 6- 76. Spanning Tree Parameters window General Parameters tab
The General Parameters tab displays the following fields:
♦ Global STP Status – Indicates the STP status. The possible values are:
◊
Enable – STP is enabled.
◊
Disable – STP is disabled.
♦ STP Type – Indicates if the STP mode is per device or per VLAN.
♦ STP Type After Reset – Indicates the STP setting after the device is reset. The possible values
are:
◊
Per Device – Indicates that the STP mode is per device.
◊
Per VLAN – Indicates that the STP mode is per VLAN.
111