D-Link DES-6300 User Manual page 82

Modular L3 Ethernet Switch User's Guide
♦ Port Status – Indicates if the interface is operational (Up), non-operational (Down), or engaged
in a test procedure so it does not carry traffic (Testing).
♦ Duplex Admin Mode – Specifies the conversation type for the interface. The options are as
follows:
◊
Full – The interface supports transmission between the device and the client in both
directions simultaneously.
◊
Half – The interface supports transmission between the device and the client in only
one direction at a time.
♦ Duplex Operation Mode – The port synchronization mode.
♦ Assign Physical Address – To assign a physical address. The options are as follows:
◊
Select Default to use the default address.
◊
Reserve to assign a unique address (up to 264 unique addresses), in incrementing
order.
♦ Autonegotiation Mode – This mode setting determines whether the Switch will automatically
negotiate for the fastest possible connection. The options are as follows:
◊
Enable – Select this option to enable the optimal connection speed.
◊
Disable – Select this option to disable this feature.
To edit a Port Properties Main tab field:
1. Display the Port Properties Main tab.
♦ Edit one of the following fields:
◊
Speed Admin Mode.
◊
Port Speed (bps).
◊
Admin Status.
◊
Duplex Admin Mode.
◊
Duplex Operation Mode.
◊
Assign Physical Address.
2. Click . When the Status field displays "Finished!", the fields are confirmed as modified.
The following figure illustrates the Port Parameters window Other tab:
82