D-Link DES-6300 User Manual page 67

Modular L3 Ethernet Switch User's Guide
or
Click
3. Select one of the following software types for updating:
♦ SW.
♦ Features.
♦ CLI.
4. Click . The update procedure begins. The update progress is illustrated by the Progress
Status incremental bar. The software update takes a few minutes. When the update is complete,
the following Confirm reset window opens:
Figure 6- 29. Confirm reset window
5. Click to reset the device. The Resetting window opens:
Figure 6- 30. Resetting window
The device is reset and the following Reset complete window prompt opens:
Figure 6- 31. Reset complete window
6. Click .
Exit
To end the current front panel display session:
to manually locate the software file.
67