D-Link DES-6300 User Manual page 170

Modular L3 Ethernet Switch User's Guide
Figure 6- 145. PIM IPM Route Next Hop window
The PIM IPM Route Next Hop window displays the following fields:
♦ Group – Specifies the IP address of the next-hop multicast group.
♦ Source – Specifies the source IP address of the multicast packet.
♦ Source Mask – Masks all or part of the source IP address.
♦ IfIndex – Identifies the outgoing port.
♦ Next Hop Address – The IP address of the next-hop.
♦ Prune Reason – Indicates the reason the downstream interface was pruned. The possible
values are:
◊
Prune – Indicates that the downstream interface was pruned in response to a prune
message.
◊
Assert – Indicates that the downstream interface was pruned due to PIM assert
processing.
IPM Routing
The IPM Routing menu has the following menus options:
IPM Routing Table
The IPM Routing Table contain multicast routing information of IP packets sent from a specific source
to IP multicast groups known to the IPM router.
To display the IPM Routing Table:
♦ Select Router > IPM > PIM > Route Next Hop, the PIM IPM Route Next Hop
window opens:
♦ Route Table
♦ Route Next Hop Table
♦ Select Router > IPM > IPM Routing > Route Table. The IPM Route Table
opens:
170