D-Link DES-6300 User Manual page 114

Modular L3 Ethernet Switch User's Guide
Figure 6- 79. Rapid STP Port Table window
The Rapid STP Port Table displays the following fields:
♦ VLAN – Identifies the VLAN to which the port belongs and STP is enabled.
♦ Port – Identifies the port number for which STP is currently enabled.
♦ Status – Indicates if the port is an edge port. The default is false.
Note: Rapid STP is recommended for edge ports in the topology. This eliminates loops that may be
created through these ports.
To edit an entry in the Rapid STP Port Table:
1. Display the Rapid STP Port Table.
2. Double-click an entry in the Rapid STP Port Table.
Click . The Rapid STP Port Table - Edit window opens:
Figure 6- 80. Rapid STP Port Table – Edit window
3. Edit the fields. The fields are the same as the Rapid STP Port Table as described above.
4. Click . The Rapid STP Port Table - Edit window closes.
or
114