D-Link DES-6300 User Manual page 107

Modular L3 Ethernet Switch User's Guide
Figure 6- 72. Spanning Tree Parameters window Root Parameters tab
The Root Parameters tab displays the following fields:
♦ STP MIB Version – Indicates the MIB version currently in use.
♦ Bridge Priority – Indicates the bridge's priority within the Spanning Tree. The bridge with the
lowest value has the highest priority, and is the root.
♦ Bridge Address – Specifies the MAC address of the bridge.
♦ Designated Root Priority – Indicates the root's priority.
♦ Designated Root Address – Specifies the root's MAC address.
♦ Root Path Cost – The cost of the path from this bridge to the root.
♦ Root Port – Indicates the port number that offers the lowest cost path from this bridge to the
Root Bridge. It is significant when the Bridge is not the Root. The default is zero.
♦ Topology Change Time – Indicates the amount of time that has passed since the last
topological change.
♦ Topology Changes Count – Indicates the total amount of topographic changes in since the
bridge was initialized or reset. The time is displayed in an hour-minute-second format, for
example, 5 hours 10 minutes and 4 seconds.
107