D-Link DES-6300 User Manual page 152

Modular L3 Ethernet Switch User's Guide
2. Select an entry in the table.
3. Click . The rsDHCP Multiple Relays Entry - Edit window opens:
Figure 6- 124. rsDHCP Multiple Relays Entry - Edit window
4. Edit the required fields.
5. Click .
6. Close the rsDHCP Multiple Relays Entry - Edit window. The DHCP Relays Table opens.
7. When the Status field displays "Finished!", the fields are confirmed as modified.
To delete a DHCP Relay Table entry:
1. Display the DHCP Relays Table.
2. Select an entry in the table.
3. Click . The entry is deleted.
UDP Relay
A device supports UDP Relay to allow UDP packets to reach other networks. This feature enables
browsing from NT workstations to NT-servers on different networks.
To display the UDP Relay Table:
♦ Select Router > IP > UDP Relay. The UDP Relay Table opens:
152