D-Link DES-6300 User Manual page 230

Modular L3 Ethernet Switch User's Guide
♦ Select Services > Device Tuning. The Device Tuning window opens. The default
screen is the General tab.
The General tab displays the following columns:
♦ Current Value – The current maximum number of entries.
♦ After Reset – The future (after reset) maximum number of entries. By entering a value
in the After Reset column, memory is allocated to the field table.
Figure 6- 209. Device Tuning window General tab
The Device Tuning window General tab displays the following parameters:
♦ Bridge Forwarding Table – Maximum number of entries (MAC addresses) possible for
this table.
♦ RMON Log Table – The number of log entries the device keeps in the table before
overwriting the first entry. It is kept until the device is reset.
♦ Max GVRP VLANS – Indicates the maximum number of VLANs that can currently
participate in GVRP.
Note: If the maximum number of VLANs is decreased, the number should still be greater than the
number of MAX GVRP VLANs.
♦ MAX Policy Simple MIB Max Rules Entries – Indicates the maximum number of policy
entries.
♦ MAX Policy Simple MIB Max Profile Entries – Indicates the maximum number of profile
entries.
♦ Max VLANs Entries – Indicates the maximum number of VLANs entries.
♦ Error Report Level – (0 to 255) Determines the amount of errors sent to the terminal. 0 sends
the least amount of errors and 255 sends the most.
230