D-Link DES-6300 User Manual page 192

Modular L3 Ethernet Switch User's Guide
Figure 6- 170. IPX SAP Table window
The IPX SAP Table displays the following parameters:
♦ Server Name – Server type and server name to identify a server. The name can include up to
47 characters.
♦ Network – Network portion (eight hexadecimal digits) from the IPX server address.
♦ Server Address – Node portion 12 hexadecimal digits) from the IPX server address.
♦ Socket – Socket portion up to four hexadecimal digits) from the IPX server address.
♦ Server Type – Type of service (assigned by Novell) provided by the server.
♦ Hops to Server – Number of hops on the route to the server, as determined by the IPX SAP
routing algorithm.
♦ Protocol Type – The information source protocol.
◊
Static – User-defined entry (SNMP)
◊
SAP – SAP protocol.
♦ Status – Defines whether the SAP interface is active. OFF is inactive but not deleted.
To add an IPX SAP Table entry:
1. Display the IPX SAP Table.
2. Click . The IPX Routing Table Insert window opens:
192