D-Link DES-6300 User Manual page 209

Modular L3 Ethernet Switch User's Guide
Figure 6- 188. IP Rules - Insert window Profiles tab
1. Complete the
as described above, except for the Profiles tab.
2. Click . The IP Rules Insert window closes.
3. Click to update the device. When the Status field displays "Finished!", the rule is saved to
the policy. If the rules could not be set to the device, one of two errors may occur:
◊
The bandwidth specified exceeds the available specified bandwidth on the output port.
◊
The QoS lock failed.
To edit a rule:
1. Display the IP Rules Table.
2. Select an entry in the IP Rules Table and click
or
Double-click a row in the IP Rules Table. The IP Rules Table - Insert window opens.
3. Edit the fields. The fields are the same as the IP Rules Table as described above, except for the
Profiles tab.
4. Click . The IP Rules Insert window closes.
fields. The fields are the same
. The IP Rules Table - Insert window opens.
209
as the IP Rules Table