D-Link DES-6300 User Manual page 74

Modular L3 Ethernet Switch User's Guide
♦ Tag – VLAN Tag ID. The possible values are 0-7.
To add new VLANs:
1. Display the VLAN Table.
2. In the VLAN Table, click
Figure 6- 41. VLAN Table Insert window
3. Complete the fields.
4. Select a device port from the list displayed above the Selected Port Table. The selected port is
added to the table where the following parameters are displayed:
♦ VLAN Port Number – The selected port interface number.
♦ VLAN Port Type – Either static or dynamic.
♦ Tagging – Identifies the VLAN to which the frame belongs. To enable port tagging check the
Enable port tagging checkbox.
♦ Forbidden Egress Ports – Indicates ports that are forbidden to be included in the Egress
Ports List for this VLAN.
5. Click to apply the new data.
6. Close the VLAN Table Insert window.
. The VLAN Table Insert window opens:
74