D-Link DES-6300 User Manual page 231

Modular L3 Ethernet Switch User's Guide
To display the Device Tuning window IP tab:
1. Display the Device Tuning window's General tab.
2. Select the IP tab. The IP tab opens:
Figure 6- 210. Device Tuning window IP tab
The IP tab displays the following parameters:
♦ IP RIP table – Maximum number of routing table entries allowed for this table.
♦ ARP Forwarding table – Maximum number of entries allowed for this table.
♦ Max IP FFT Entries – Maximum number of IP Fast Forwarding table entries allowed.
♦ Max IP System Entries – Maximum number of IP entries that can be entered into the system.
♦ IP FFT Upper Limit (percents) – Maximum percentage of entries that the device can hold in
FFT without overflowing.
♦ IP FFT Lower Limit (percents) – Minimum percentage of entries in which the device would
stop the overflowing process.
To display the Device Tuning window IPX tab:
1. Display the General tab.
2. Select the IPX tab. The IPX tab opens:
231