D-Link DES-6300 User Manual page 190

Modular L3 Ethernet Switch User's Guide
Figure 6- 167. IPX Routing Table Insert window
An IPX circuit is linked to the Destination network.
To select an IPX circuit, on the IPX Routing Table Insert window click the Select Circuit button. The
Select Circuit window opens:
Figure 6- 168. Select Circuit window
The Select Circuit window displays the following parameters:
♦ Circuit Number – The IPX circuit number.
♦ Network Address – The IPX circuit network address.
3. Select an entry in the table.
4. Click .
5. Close the Select Circuit window. IPX Routing Table Insert window opens.
6. Complete the fields.
7. Click .
8. Close the IPX Routing Table Insert window. The IPX Routing Table opens.
9. Click . When the Status field displays "Finished!", the fields are confirmed as modified.
190