D-Link DES-6300 User Manual page 75

Modular L3 Ethernet Switch User's Guide
To delete ports from the Port Table:
1. Display the VLAN Table window.
2. In the VLAN Table window, click
3. Highlight the port numbers of the ports you want to delete in the Port Table.
4. Click
Ports list.
To edit Existing VLANs:
1. Display the VLAN Table.
2. Select an entry in the table.
3. Click . The VLAN Table Edit window opens. The window is identical to the VLAN Table
Insert window.
4. Edit the required fields.
5. Click to apply the new data.
6. Close the VLAN Table Edit window.
To delete Existing VLANs:
1. Display the VLAN Table.
2. Select an entry in the table.
3. Click . The entry is deleted.
4. Click to update the device
VLAN Table Per Port and Protocol
To display the VLAN Table window:
(Make sure Per Protocol and Port is selected under "VLAN supported type after reset" on the Virtual LAN
Parameters window (Device > VLAN > VLAN Parameters)).
♦ Select Device > VLAN > VLAN Table. The VLAN Table opens:
. The VLAN Table Insert window opens.
. The ports are highlighted and the port numbers appear in the Available
75