Modular L3 Ethernet Switch User's Guide
1.
Display the RIP Interface Table (Select Router > IP > RIP > Interface Parameters).
2.
Select an entry in the table.
3.
Click
. The RIP Interface Table Edit window opens:
Figure 6- 94. RIP Interface Table Edit window
The RIP Interface Table Edit window fields are described above.
4.
Edit the selected table entry fields and click
5.
Click
. When the Status field displays "Finished!", the fields are confirmed as modified.
To display the OSPF Interface Table Edit window:
OSPF is supported from software version 3.03 and up.
1.
Display the IP Router Interface Parameters Edit window.
2.
Press the OSPF Parameters button. The OSPF Interface Table Edit window opens:
. The RIP Interface Table opens.
126