D-Link DES-6300 User Manual page 195

Modular L3 Ethernet Switch User's Guide
♦ Community Access – Defines whether the management station access is Read Only or Read
Write. Choose Super Community to set the name used to access the Community Table. The
possible values are:
◊
Read Only
◊
Read Write
◊
Super
♦ Send Traps – Whether the management station receives traps from the device (Enable) or not
(Disable).
Note: To change the community, Super Community access is required.
To add a Community Table entry:
1. Display the Community Table.
2. Click . The Community Table Insert window opens:
Figure 6- 174. Community Table Insert window
3. Complete the fields.
4. Click .
5. Close the Community Table Insert window. The Community Table opens.
6. Click . When the Status field displays "Finished!", the fields are confirmed as modified.
To edit a Community Table entry:
1. Display the Community Table.
2. Select an entry in the table.
3. Click . The Community Table Edit window opens:
195