Modular L3 Ethernet Switch User's Guide
Figure 6- 211. Device Tuning window IPX tab
The IPX tab displays the following parameters:
♦ IPX RIP Table – Maximum number of routing table entries allowed for this table.
♦ IPX SAP Table – Maximum number of server entries allowed.
♦ Max IPX FFT Entries – Maximum number of IPX Fast Forwarding table entries allowed.
♦ Max IPX System FFT Entries – Maximum number of IPX entries that can be entered into the
system.
♦ IPX FFT Upper Limit (percents) – Maximum percentage of entries the device can hold in FFT
whiteout flowing.
♦ IPX FFT Lower Limit (percents) – Minimum percentage in which the device would stop the
overflowing process.
To display the Device Tuning window IPM tab:
1.
Display the General tab.
2.
Select the IPM tab. The IPM tab opens:
232