D-Link DES-6300 User Manual page 236

Modular L3 Ethernet Switch User's Guide
The Ping Table displays the following parameters:
♦ IP Address – The device address pinged.
♦ Sent Packets – The number of packets sent to the device.
♦ Received Packets – The number of packets received from the device.
♦ Avg Return Time – The average amount of time it took for data to return from the device.
♦ Completion Status – The ping operation status, such as OK for a successful ping, or Timeout
for a ping operation that resulted in a timeout.
♦ Time Stamp – Indicates the time and date the ping operation was requested or changed.
To add an entry in the Ping Table:
1. Display the Ping Table.
2. Click . The Ping Table Insert window opens:
Figure 6- 217. Ping Table Insert window
The Ping Table Insert window displays the following parameters:
♦ IP Address – The device address to be pinged.
♦ Packet Count – The number of packets delivered in the ping operation.
♦ Packet Size – The size of each packet delivered to the device.
♦ Packet Timeout – The amount of time the system waits until it stops sending the packet.
♦ Delay – The amount of time the system waits between the last packet it sent, and the next
packet to be sent in the sequence.
♦ Trap on Completion – Whether or not to send traps to the management station after ping is
completed.
3. Complete the fields.
4. Click .
5. Close the Ping Table Insert window. The Ping Table opens.
6. Click . When the Status field displays "Finished!", the fields are confirmed as modified.
To edit a line in the Ping Table:
1. Display the Ping Table.
2. Select an entry in the table.
236