D-Link DES-6300 User Manual page 204

Modular L3 Ethernet Switch User's Guide
◊
Not Ready – Indicates that some of the output ports do not meet the bandwidth
allocation prerequisites or QoS locking prerequisites. Auto-negotiation should be
disabled and the output port should be in full duplex mode.
Note: The first rule matching a packet is applied, therefore, the order of the rules in the IP Rules Table
is important.
To add a new rule in IP Rules Table:
1. Display the IP Rules Table.
2. Double-click an empty row in the IP Rules Table.
or
Click. . The IP Rules Insert window opens. The IP Insert Rules window has the following
tabs:
♦ General – Displays the general options for assigning rule value including the user-defined
description, error description and if the rule is currently active.
♦ Classification – Displays the IP Classification Fields for assigning rule value including the
ToS, protocol types, source and destination IP addresses, source and destination IP address
masks, source and destination ports, and conditions.
♦ Input Ports – Displays a list of input ports to choose from for assigning rule value.
♦ Action – Displays the action options for assigning rule value, including a list of the optional
output ports if the action is permit.
♦ Profiles – Displays the profiles to attach to a rule if the action value is permit. The Profiles
tab is grayed out if the action is block or block and trap. The Profiles tab displays the same
fields as the Profile Table. For a list of the fields in the Profile Table.
204