D-Link DES-6300 User Manual page 44

Modular L3 Ethernet Switch User's Guide
Cannot View Tables When Using A Browser
There are some compatibility problems between Microsoft and Sun JVMs (Java Virtual Machines). There
could be a problem using one JVM as a client (Sun Netscape Browser or HotJava and Microsoft Internet
Explorer), and the other as a server (Sun Jrew and Microsoft Wjview).
To avoid compatibility problems, ensure that the same propriety JVM is used for both client and server
(i.e., Netscape or Hot Java browsers as clients and Sun JRE as a server, or, Microsoft Internet Explorer
as a client and Wjview as a server).
Local Intranet Use
If the system uses a Web browser to access a local Intranet Web server, and there is a Proxy server
installed for communication with the Internet, the Proxy server must be disabled when connecting to
the Web server running ConfigMaster.
To disable the Proxy server:
1. Configure the Proxy server not to pass out the Web server IP address (after configuring, reboot
the client before connecting the Web server).
2. Disable the Proxy client (WSP Client) in the Control Panel.
3. Configure the browser to bypass the Proxy server when connecting the Web server IP address.
To configure the Internet Proxy with a Web server ID:
1. Select Start > Settings > Control Panel. The Control Panel window opens.
2. Click Internet Options. The Internet Options window opens.
3. Click the Connections tab. The Connections tab opens.
4. Click
5. In the Proxy server panel, select the two checkboxes and click Advanced to open the Proxy
Settings window.
6. In the Exceptions panel, enter the Web server IP address.
7. Click
8. Click
ConfigMaster.bat Does Not Activate ConfigMaster
If running ConfigMaster.bat does not activate ConfigMaster and displays an error message regarding an
invalid path, check if the command interpreter is 32-bit (MS-DOS Prompt or Command Prompt).
This error occurs if a 16-bit command interpreter, which does not support long filenames, runs the
batch file.
Running the BER/ASCII Converter Without Running ConfigMaster
The BER/ASCII
/<Installation_Directory>/ConfigMaster/NMS/ Configuration/convert.bat
The syntax is:
convert.bat <direction> <Source_file> <Destination_file>
Where:
<direction> – Indicates the type of the file conversion: enter 0 to convert an ASCII file to BER format;
and 1 to convert a BER file to ASCII format.
<Source_file> – Indicates the name of the file being converted to another format.
.
.
in the Internet Options window.
converter can run using the
44
following batch file: