D-Link DES-6300 User Manual page 65

Modular L3 Ethernet Switch User's Guide
Figure 6- 26. Send Configuration to Device window
2. In the File Name field, enter the configuration file name to send to the device, or press
locate the configuration file name.
3. If the configuration file is saved on the external TFTP server, check the "External TFTP Server IP
Address" check box and enter the external TFTP server IP address.
4. Click . The procedure begins. The procedure progress is illustrated by the Progress Status
incremental bar. When the incremental bar indicates that the procedure is completed, a Reset
window prompt opens.
5. Click Reset to reset the device. The device is reset.
Get Configuration From Device
To maintain a copy of the device configuration file, the device configuration is saved on the server.
To save (or backup) the modified configuration files:
1. Select File > Configuration File > Get Configuration from Device. The Get Configuration
from Device window opens:
Figure 6- 27. Get Configuration from Device window
65
to