D-Link DES-6300 User Manual page 139

Modular L3 Ethernet Switch User's Guide
5. Click .
6. Close the OSPF Interface Table Edit window. The OSPF Interface Table opens.
7. Click . When the Status field displays "Finished!" the fields are confirmed as modified.
Area Table
Note: A device configured to support OSPF does not support virtual links.
A device supports up to 120 IP interfaces and up to 362 neighbors on one Area. OSPF supports leaks to
RIP1 and RIP2.
To display the OSPF Area Table:
♦ Select IP > OSPF II > Area Table. The OSPF Area Table opens:
Figure 6- 108. OSPF Area Table window
The OSPF Area Table displays the following parameters:
♦ Area ID – The area IP address.
♦ Import as External – The area support for importing as external link state advertisement.
♦ Area Summary – Controls the import of summary LSAs into stub areas. This variable has no
effect on other areas.
◊
No Area Summary – The router neither originates nor distributes summary LSAs into
the stub area. It relies on its default route.
◊
Send Area Summary – The router both summarizes and distributes summary LSAs.
♦ Metric – The metric for this type of service on the interface.
♦ Metric Type – The metric protocol type.
To add an OSPF area:
1. Display the OSPF Area Table.
2. Click . The OSPF Area Table Insert window opens:
139