D-Link DES-6300 User Manual page 175

Modular L3 Ethernet Switch User's Guide
♦ Layer II Protocol – Encapsulation method associated with this interface. If the Interface
Number refers to a VLAN, this must be the same encapsulation as used by the VLAN.
♦ NetBios – NetBios type 20 broadcast packets are forwarded to this interface.
♦ Admin Status – Indicates whether this circuit entry is valid, or Sleeping (currently inactive).
To add an IPX Router Interface entry:
1. Display the IPX Router Interface Parameters window.
2. Click . The IPX Router Interface Parameters Insert window opens:
Figure 6- 149. IPX Router Interface Parameters Insert window
3. Complete the fields.
4. Click .
5. Close the IPX Router Interface Parameters Insert window. The IPX Router Interface
Parameters window opens.
6. Click . When the Status field displays "Finished!", the fields are confirmed as modified.
To edit an IPX Router Interface entry:
1. Display the IPX Router Interface Parameters window.
2. Select an entry in the table.
3. Click . The IPX Router Interface Parameters Edit window opens:
175