D-Link DES-6300 User Manual page 201

Modular L3 Ethernet Switch User's Guide
IP Classification Fields
IP Classification Fields window allows you to define the fields used to classify network traffic.
To display the IP Classification Fields window:
Figure 6- 182. IP Classification Fields window
The IP Classification Fields window displays the following parameters:
♦ ToS – Type of Service. Enables (checked) classification by the ToS tagging for forwarding
packets.
♦ Protocol – Enables (checked) classification of packets by their type of protocol.
♦ Source IP Bit Mask (0-32) – Used to mask all or part of the source IP address. If selected,
QoS matches packets arriving from the indicated source IP address, within the limits of the
source IP mask. The values are 0-32.
♦ Destination IP Bit Mask (0-32) – Used to mask all or part of the destination IP address. If
selected, QoS matches packets being sent to the indicated destination IP address, within the
limits of the destination IP mask. The values are 0-32.
♦ Source Port Protocol – Enables (checked) the classification of arriving packets by their
source port protocol type.
♦ Destination Port Protocol – Enables (checked) the classification of arriving packets by their
destination port protocol type
♦ Input Ports – Enables (checked) the classification of arriving packets by the physical input
port.
To Define the IP Classification Fields
1. Display the IP Classification Fields window.
2. Complete the fields. The fields are the same as the IP Classification Fields described above.
♦ Select QoS > Routed IP > Routed IP Classification Fields. The IP
Classification Fields window opens:
201