D-Link DES-6300 User Manual page 155

Modular L3 Ethernet Switch User's Guide
1. Display the UDP Relay Table.
2. Select an entry in the table.
3. Click . The entry is deleted.
4. Click . When the Status field displays "Finished!", the fields are confirmed as modified.
TCP General Parameters
The TCP General Parameters window displays information about how TCP is implemented on the
device.
To display the TCP General Parameters:
♦ Select Router > IP > TCP General Parameters. The TCP Parameters window opens:
Figure 6- 127. TCP Parameters window
The TCP Parameters window displays the following parameters:
♦ Algorithm Type – The Algorithm used to determine the timeout value used for re-transmitting
unacknowledged octets.
♦ Min. Timeout (ms) – The minimum value permitted by a TCP implementation for the re-
transmission timeout, measured in milliseconds.
♦ Max. Timeout (ms) – The maximum value permitted by a TCP implementation for the re-
transmission timeout, measured in milliseconds.
♦ Max. Connections – The limit on the total number of TCP connections the entity can support.
In entities where the maximum number of connections is dynamic, this object contains the
value -1.
TCP Connections Table
To display the TCP Connections Table:
♦ Select Router > IP > TCP Connection Table. The TCP Connections Table opens:
155